BECKHOFF EL9xxx - Manual (Page 16)

Product overview
Technical data
Technical Data EL9070
Technology shield terminal
Current load ≤ 10 A
Power LED ­
Error LED ­
Current consumption E­bus ­
Nominal voltage arbitrary up to 230 V AC
Integrated fine­wire fuse ­
Electrical isolation ­
Diagnostics in the process image ­
Reported to E­bus ­
PE contact no
Shield connection 8 x
Connection facility to additional power contact no
E­bus looped through yes
Bit width in the process image 0
Electrical connection to mounting rail yes (dissipation of EMC interference via large copper
surfaces on the mounting rail)
Electrical connection to power contacts ­
Configuration no address or configuration settings
Dimensions (W x H x D) approx. 15 mm x 100 mm x 70 mm (width aligned: 12
mm)
Weight approx. 50 g
Permissible ambient temperature range (during
operation) 0°C ... +55°C
Permissible ambient temperature range (during
storage) ­25°C ... +85°C
Permissible relative humidity 95%, no condensation
Mounting [ } 60] on 35 mm mounting rail conforms to EN 60715
Vibration/shock resistance conforms to EN 60068­2­6/EN 60068­2­27
EMC resistance burst/ESD conforms to EN 61000­6­2/EN 61000­6­4
Protect. class IP 20
Installation pos. variable, see chapter "Mounting of Passive Terminals
[
} 70]"
Approval CE
Connection
Terminal point Meaning
Indication No.
1 ­ 8 1 ­ 8 Terminal points 1 ­ 8 are connected internally
EL9xxx 16 Version 3.1