BECKHOFF CX51x0 - Manual (Page 14)

Product overview
Module Clock fre­
quency
of
the CPU Operating system TwinCAT2 runtime Optional
TwinCAT 3
Windows Embedded
Standard 7 P without
TwinCAT PLC
runtime NC PTP
runtime NC I
runtime
Witho
ut 32 bit 64 bit
CX5130­0100 1.75 GHz X ­ ­ X ­ ­ ­ ­
CX5130­0120 1.75 GHz ­ X ­ X ­ ­ ­ X
CX5130­0121 1.75 GHz ­ X ­ ­ X ­ ­ ­
CX5130­0122 1.75 GHz ­ X ­ ­ X X ­ ­
CX5130­0123 1.75 GHz ­ X ­ X X X X ­
CX5130­0130 1.75 GHz ­ ­ X X ­ ­ ­ X
CX5140­01xx:
Module Clock fre­
quency
of
the CPU Operating system TwinCAT2 runtime Optional
TwinCAT 3
Windows Embedded
Standard 7 P without
TwinCAT PLC
runtime NC PTP
runtime NC I
runtime
Witho
ut 32 bit 64 bit
CX5140­0100 1.91 GHz X ­ ­ X ­ ­ ­ ­
CX5140­0120 1.91 GHz ­ X ­ X ­ ­ ­ X
CX5140­0121 1.91 GHz ­ X ­ ­ X ­ ­ ­
CX5140­0122 1.91 GHz ­ X ­ ­ X X ­ ­
CX5140­0123 1.91 GHz ­ X ­ X X X X ­
CX5140­0130 1.91 GHz ­ ­ X X ­ ­ ­ X
CX51x0 systems with Windows Embedded Standard 7 P require a CFast card with a minimum capacity of 8
GB. If TwinCAT3.1 is to be installed with a development environment, a CFast card with a minimum capacity
of 16 GB is recommended.
Note
Software Images
A list of the different software images can be found in the CX Software Documentation.
CX51x0 14 Version 1.0