Becker TRAFFIC ASSIST Z217 - Manual (Page 20)

20
>>> GENERAL OPERATION
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
Connecting up external antenna
To enable reception under adverse recep-
tion conditions, an external GPS antenna
can be connected (not included). For this
purpose, a closable connecting socket is
located on the rear of the housing. If no
external antenna is connected, this con-
nection must always be closed again.
> Open the closure by pulling gently on
the side.
> Connect the external antenna using the
optionally available adapter.
Cable for vehicle integration
(optional)
With the optional cable you can integrate
your Traffic Assist seamlessly into your ve-
hicle.
With this cable you can:
• connect your Traffic Assist to the phone
mute function of your audio system. If
the cable is connected correctly, your
audio system will mute the car radio
during navigation announcements.
• connect your Traffic Assist to your au-
dio system for output of the audio sig-
nal.
• You can connect an optionally available
microphone.
The individual connectors on the other
end of the cable are labelled.
> Insert the cable into the socket provided
on the underside of the carrier plate.
Note:
As soon as the cable is connected, the
Traffic Assist loudspeaker is switched off.