Using the battery, Connection for the cigarette lighter, General operation – Becker TRAFFIC ASSIST Z217 User Manual
Page 18
18
>>>
GENERAL OPERATION
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
Using the battery
The internal power supply is via the inte-
grated rechargeable battery. The recharge-
able battery is maintenance-free and does
not require any particular care.
Connection for the cigarette
lighter
Connect the power supply via the vehicle
battery and the cable provided for the cig-
arette lighter as follows:
> Hold the connector of the connecting
cable and push it all the way into the
connecting socket on the Traffic Assist
or the connecting socket on the under-
side of the carrier plate without using
excessive force.
> Insert the adapter into the cigarette
lighter.
Note:
Note that if the battery is completely dis-
charged, it may take up to a minute be-
fore the device can be switched on again.
Note:
In the event of a defective battery, please
contact your authorised dealer. Please do
not attempt to remove the battery your-
self.
Note:
If the cigarette lighter has recently been
used and is still hot, wait until the lighter
socket has cooled down.
Note:
When the engine is switched off, the
power supply slowly discharges the vehi-
cle battery via the cigarette lighter!
Do not therefore operate the Traffic As-
sist for long periods with the engine
switched off.
TMC announcements can only be re-
ceived when the power supply is connect-
ed to the carrier plate.