BayTech DS2-RPC 2012 - Manual (Page 18)

Page
18
Change Outlet Name
Enable/Disable Confirmation
Enable/Disable Status Menu
1)...Manage Users
2)...Change Outlet Name
3)...Enable/Disable Confirmation
4)...Enable/Disable Status Menu
5)...Change Unit ID
6)...Change Alarm Threshold
X)...Exit
Enter Request: 2
1)...Outlet 1
2)...Outlet 2
3)...Outlet 3
4)...Outlet 4
Enter Request: 1
Current Outlet: Outlet 1
Modify (Y/N)? y
Enter : Tester 1
1)...Tester 1
2)...Outlet 2
3)...Outlet 3
4)...Outlet 4
Enter Request:
1)...Manage Users
2)...Change Outlet Name
3)...Enable/Disable Confirmation
4)...Enable/Disable Status Menu
5)...Change Unit ID
6)...Change Alarm Threshold
X)...Exit
Enter Request: 3
Enable Confirmation (Y/N)? y
Or
Disable Confirmation (Y/N)? y
1)...Manage Users
2)...Change Outlet Name
3)...Enable/Disable Confirmation
4)...Enable/Disable Status Menu
5)...Change Unit ID
6)...Change Alarm Threshold
X)...Exit
Enter Request: 4
Enable Status Menu (Y/N)? y
Or
Disable Status Menu (Y/N)? y
Select 2) Change Outlet Name from the Configuration Menu
to rename the outlets.
The unit responds with a list of outlets. Type the number of an
outlet and press ‘Enter’.
The unit responds with the Current Outlet name and ‘Modify
(Y/N)?’ Type “Y” for yes to change the outlet name and press
‘Enter’. Type the new name. Type “N” to keep the same outlet
name and press ‘Enter’.
The unit displays the outlet list with the renamed outlet.
Select 3) Enable/Disable Confirmation from the
Configuration Menu to enable a confirmation prior to
executing command.
If the unit responds with ‘Enable Confirmation (Y/N)?’, The
Confirmation is currently disabled.
If the unit responds with ‘Disable Confirmation (Y/N)?’,
The Confirmation is currently enabled.
Type “Y” for yes or “N” for no and press ‘Enter’.
Default is Enabled.
Select 4) Enable/Disable Status Menu from the
Configuration Menu to enable outlet status menu
If the unit responds with ‘Enable Status Menu (Y/N)?’. The
Status Menu is currently disabled. If the unit responds with
‘Disable Status Menu (Y/N)?’. The Status Menu is currently
enabled. Type “Y” for yes or “N” for no and press Enter’. A
Disabled Status Menu is display only the prompt: “DS-RPC>’
Default is Enabled.