BayTech DS2-RPC 2012 - Manual (Page 16)

Page
16
­­­­Add Individual Outlets
­­­­Remove Individual Outlets
­­­­Add All Outlets
‐‐‐­Remove All Outlets
---------------------------------------------
| User | Assigned Outlets |
| | 1 | 2 | 3 | 4 |
---------------------------------------------
| Engineer | Y | N | Y | N |
---------------------------------------------
1)...Add Outlet(s)
2)...Remove Outlet(s)
3)...Add All Outlets
4)...Remove All Outlets
Enter Request: 2
Enter Outlet number(s): 1
---------------------------------------------
| User | Assigned Outlets |
| | 1 | 2 | 3 | 4 |
---------------------------------------------
| Engineer | N | N | N | N |
---------------------------------------------
1)...Add Outlet(s)
2)...Remove Outlet(s)
3)...Add All Outlets
4)...Remove All Outlets
Enter Request: 1
Enter Outlet number(s): 1, 3
---------------------------------------------
| User | Assigned Outlets |
| | 1 | 2 | 3 | 4 |
---------------------------------------------
| Engineer | N | N | Y | N |
---------------------------------------------
1)...Add Outlet(s)
2)...Remove Outlet(s)
3)...Add All Outlets
4)...Remove All Outlets
Enter Request: 3
---------------------------------------------
| User | Assigned Outlets |
| | 1 | 2 | 3 | 4 |
---------------------------------------------
| Engineer | Y | Y | Y | Y |
---------------------------------------------
1)...Add Outlet(s)
2)...Remove Outlet(s)
3)...Add All Outlets
4)...Remove All Outlets
Enter Request: 4
The unit displays the selected user and a list of
assigned outlets. (‘N’ = not assigned; ‘Y’ =
assigned).
Select 1) to add outlets to the listed user.
The unit will respond with, “Enter Outlet
number(s)”: Type the number of the outlet to be
assigned. If multiple outlets are to be assigned, type
the numbers of the outlets with a comma between
the numbers and press ‘Enter’, i.e. (1, 3) will assign
outlets 1 and 3 to the Engineer user.
Select 2) to remove individual outlets from a user.
The unit responds with ‘Enter Outlet number(s):’
Type the number of the outlet to be removed. If
multiple outlets are to be removed, type the numbers
of the outlets with a comma between the numbers
and press ‘Enter’,
The unit displays the user list minus the removed
outlets.
Select 3) to add all outlets to the user.
The unit displays the user with all outlets assigned,
(Y).
Select 4) to remove all outlets assigned to the user.
The unit displays the user with no outlets assigned,
(N).