BayTech DS2-RPC 2012 - Manual (Page 11)

Page
11
Figure 9: Host Module Menu
Figure 10: Module Configuration Menu
Figure 11: DS-RPC Configuration Menu
Figure 12: Add User Menu
Module:
Attention Character: ]
Device A ................1
Device B ................2
Device C ................3
Device D ................4
DS-RPC ................5
Configure.......................C
Status..........................S
Unit Reset......................RU
Logout..........................T
Enter Request :c
Configuration
DS62 module #1.........1
DS74 module #2.........2
DS-RPC module #3.........3
Enter Request :3
1)...Manage Users
2)...Change Outlet Name
3)...Enable/Disable Confirmation
4)...Enable/Disable Status Menu
5)...Change Unit ID
6)...Change Alarm Threshold
X)...Exit
Enter Request :1
---------------------------------------------
| User | Assigned Outlets |
| | 1 | 2 | 3 | 4 |
---------------------------------------------
---------------------------------------------
A)...Add User
D)...Delete User
R)...Rename User
Enter user number to assign Outlets, A, D or R.
Enter Request: a
Enter user name: engineer
---------------------------------------------
| User | Assigned Outlets |
| | 1 | 2 | 3 | 4 |
---------------------------------------------
| engineer | N | N | N | N |
---------------------------------------------
1)...Add Outlet(s)
2)...Remove Outlet(s)
3)...Add All Outlets
4)...Remove All Outlets
Enter Request: 1
Enter Outlet number(s): 1,3
Type the letter “A” at the prompt to add a
user.
Type the name of user.
Select number of user.
Type “1” or “3” to add outlets.
---------------------------------------------
1)...engineer | N | N | N | N |
---------------------------------------------
A)...Add User
D)...Delete User
R)...Rename User
Enter user number to assign Outlets, A, D or R.
Enter Request: 1