Partition sliding door – Dodge 2007 Sprinter User Manual
Page 67
66
Controls in detail
Opening and closing
3
Deactivating the automatic locking
when driving function for the sliding
doors and the rear door
̈ Close all the doors.
̈ Turn the key to position 1 or 2 in the ig-
nition lock (
̈ Press lower part 2 of the switch. Keep
it pressed for approximately
5 seconds.
The indicator lamp in the switch flashes
twice.
The partition sliding door is in the partition
between the cab and the load compart-
ment.
Operating the partition sliding door
from inside the cab
1 To close
2 To open
3 To unlock
̈ To open: turn the key counterclock-
wise 3.
The sliding door is unlocked.
̈ Slide the sliding door to the right as far
as the stop 2.
̈ To close: slide the sliding door to the
left until it engages 1.
The sliding door can be locked using
the key.
Operating the partition sliding door
from inside the load compartment
1 To open
2 To close
3 To unlock
̈ To open: press the lever to the
right 3.
The sliding door is unlocked.
̈ Slide the sliding door to the left as far
as the stop 1.
̈ To close: slide the sliding door to the
right until it engages 2.
Partition sliding door*
Warning
G
Make sure that nobody can become trapped
as you close the partition sliding door.