Jack and vehicle tool kit – Dodge 2007 Sprinter User Manual
Page 301
300
Practical hints
Where will I find...?
5
3 First-aid kit
The jack and the vehicle tool kit are locat-
ed under the hatch in the co-driver’s foot-
well.
1 Quick-release lock
2 Unlocked
̈ To unlock: turn quick-release lock 1
counterclockwise or clockwise.
̈ Remove the cover.
̈ To lock: press quick-release lock 1
down until it engages.
i
Check the expiry dates of the first-aid
kit materials every year, and replace
them if necessary.
Jack and vehicle tool kit
Warning
G
To avoid the risk of causing serious or fatal
injury, or damage to the vehicle, please bear
the following points in mind:
ț The jack is designed only to raise the ve-
hicle for a short time, for example while
a wheel is being changed.
It is not designed to enable work to be
carried out underneath the vehicle.
ț The jack must be placed on a firm, flat
surface only.
ț Do not change wheels on uphill or down-
hill gradients under any circumstances.
ț Do not crawl under the vehicle if it is
only supported by the jack.
ț Make sure that no persons are present
in the vehicle when raising the vehicle.
ț Do not start the engine while the vehicle
is raised.
ț Make sure that the distance between
the underside of the tires and the
ground does not exceed 30 mm.
ț If work is to be carried out under the
vehicle, the vehicle must be placed on
stands.