Dodge 2007 Sprinter - Manual (Page 337)

336
Practical hints
Battery
5
Disconnecting the starter battery
The starter battery is in the battery recess
in the driver’s footwell.
Removing/installing the floor covering
in the driver's footwell
1 Floor covering
2 Trim
3 Securing screws
̈ To remove: undo screws 3 and re-
move trim 2.
̈ Remove floor covering 1.
̈ To install: place floor covering 1 into
the driver’s footwell.
̈ Push floor covering 1 under the plate
metal bracket of the accelerator pedal
and align it with the driver’s seat base
and the doorway
Make sure the floor covering does not
obstruct the accelerator’s range of
movement.
̈ Position trim 2 and screw screws 3
back in.
Removing the battery cover in the
driver’s footwell
1 Cover
2 Securing screws
̈ Undo screws 2 and slide cover 1 in
the direction of the arrow.
The screws must protrude beyond the
recesses.
Warning
G
The movement of the pedals must not be ob-
structed. The vehicle’s operating and road
safety are otherwise jeopardized.
Make sure to push the floor covering under
the plate metal bracket of the accelerator
pedal. The floor covering may not slip bet-
ween the bracket and the accelerator pedal.
Otherwise, you may not be able to fully
depress the accelerator pedal, which will
restrict the vehicle’s acceleration capability,
for example when passing another vehicle.