Engine cleaning, Outside of windshield and wiper blades – Dodge 2007 Sprinter User Manual
Page 244
243
Operation
Cleaning and care of the vehicle
4
Steps
Engine cleaning
Light-alloy wheels*
Clean light-alloy wheels on a regular basis.
Outside of windshield and wiper blades
̈ Turn key to position 1 in ignition lock
̈ Switch on windshield wipers
̈ When the wiper arms are vertical, turn
key to position 0 in the ignition lock or
remove the key.
̈ Fold the wiper arms away from the
windshield until you feel them engage
in place.
̈ You can now clean the windshield and
the wiper blades.
̈ Fold the windshield wipers back again
before you switch on the ignition.
Warning
G
Dirty or iced-up steps and entrances create
a risk of slipping or falling.
Keep steps, entrances and footwear free
from dirt (e.g. mud, clay, snow and ice).
!
CAUTION
Do not allow water to enter the intake
and ventilation openings.
When cleaning with high-pressure wa-
ter or steam cleaners, the spray must
not be aimed directly at electrical com-
ponents or at the end of electrical
lines.
Treat the engine with preservative
agents after cleaning. Protect the belt
drive system from the preservative
when you do so.
!
CAUTION
Do not use any acidic or alkaline clean-
ing agents. They can cause corrosion of
the wheel bolts (wheel nuts) or the bal-
ancing weight retainers.
!
CAUTION
Do not fold the windshield wipers away
from the windshield unless the hood is
closed. You will otherwise damage the
hood.
Warning
G
Switch off the ignition before cleaning the
windshield or the wiper blades. The wind-
shield wipers could otherwise move and in-
jure you.