Dodge 2007 Sprinter - Manual (Page 311)

310
Practical hints
Changing bulbs
5
Changing the rear bulbs
(van/crewbus)
̈ Switch off the lighting.
Rear lamp units
1 Securing screws
̈ Undo screws 1 and remove the rear
lamp unit in the direction of the arrow.
̈ Remove the connector.
2 Retaining lugs
3 Brake lamp
4 Side marker, Standing lamp (Canada
only), tail lamp
5 Reverse lamp
6 Turn signal lamp
7 Rear foglamp (driver’s side)
̈ Release retaining lugs 2 and remove
the bulb holder from the rear lamp unit.
̈ Press down on the bulb, turn it counter-
clockwise and remove it from the
holder.
̈ Press the new bulb into the bulb holder
and screw it in clockwise.
̈ Plug the connectors into the bulb
holder.
̈ Fit the rear lamp unit.
To do this, clip the bulb holder into the
three holes provided on the side and
tighten screws 1.
Changing the rear bulbs (chassis)
Example illustration of chassis
1 Securing screws
2 Lens
3 Perimeter lamp, side marker
4 Turn signal lamp
5 Brake lamp