Baby Lock Momentum Quilting Frame (BLQM) Instruction and Reference Guide - Manual (Page 24)

Page. 23
Sliding Rail not moving: Check if the Speed Control Knob is switched away from stop. The cables to the
Master Board Box, Frame Ends, and Table Structure must be attached correctly in their respective ports.
(Step 8: Bottom Carriage Assembly, Step 15: Wire Connection, and Step 16: Speed Control) There is also a
built-in sleep mode when the machine is not in operation. This may need to be reset, which would require
the user to unplug and plug the AC Power Supply.
Bungee Clamps: If it is necessary to use the bungee clamps over the batting on your quilt, turn the bun-
gee clamps upside down so the rubber grip in the clamp is gripping against the bottom fabric instead of the
batting. Having the rubber grip clamp against the batting is less effective than having it clamp against the
fabric.
Fabric Issues: Do not over-tighten the fabric on the quilting frame. Stretching the fabric will result in a
quilt that does lay flat when it is finished.
Frame Cleaning: Regularly clean the wheels and track of your carriage and frame. Lint from the batting
will build up quickly, causing the carriage not to roll as smoothly if neglected.
Trouble Shooting Guide