Avery Dennison SNAP Webserver Upgrade - Manual (Page 5)

SNAP Printer Upgrade Through the Web Server V1_1.doc Page 5 of 5
Upgrading the Printer
To upgrade the printer, first open a browser window, enter the printer’s IP address
in the address bar, and press Enter. The following window will appear.
Simply click the Upgrade Firmware button. The printer will perform the upgrade
operation automatically.
The browser window will not refresh automatically, and the web server will not
be available during the upgrade. To determine if the upgrade is complete, refresh
the browser window. When the upgrade is complete, the above window will
reappear with the new firmware version shown in the SW Version box.
NOTE
If you refresh the browser window during the upgrade
process, you will receive an error message that the
connection has timed out or the web page is unavailable.
Simply refresh again until the web page appears.