beautypg.com

Avery Dennison Sierra Sport3 9433 Vehicle Mount User Manual

Page 8

background image

8

L o a d i n g S u p p l i e s

To load supplies into the printer:

1. Turn off the printer.

2. Attach the printer to the vehicle mount.

3. Squeeze the supply bracket and the spring-loaded supply holder. Pull

the hook end of the supply holder and turn it to the left to release the
supply bracket. Pull the bracket up.

Note: The supply holder cannot be removed.

4. Load the supply so it unrolls from the bottom.

5. Lower the bracket so the supply turns freely, then squeeze the supply

bracket and pull and turn the supply holder to the right to lock the supply
roll in place.

Supply Holder

Spring

Supply Bracket