Avery Dennison Sierra Sport3 9433 Bluetooth - Manual (Page 9)

9
1. Select PIN. The previous PIN value appears, for example:
2. Press D or U to increase or decrease the highlighted number.
Press L or R to highlight a different number.
3. When you are finished, press R until you see e. Then, press e to save
the setting. "PIN Changed" appears briefly on the display and you return
to the Bluetooth menu.
If you need to clear digits from your PIN, make the second digit a
space, save the setting, and then select Change Pin again.
Only your first digit was saved, because the space is a terminating
character.
Name
Use this option to view and set the Bluetooth local name. The name can be
up to 15 characters: upper-case letters A to Z, numbers 0 to 9, and the
space character.
The name is used for identification purposes with the host, not
authentication. You should use a logical name for each printer, such as
“warehouse”, “receiving dock”, etc.
4. Select Name.
The default or last-saved local name appears, for example:
5. Press D or U to change the highlighted letter. Press L or R to highlight
a different letter.
6. When you are finished, press R until you see e. Then, press e to save
the setting. "Name Changed" appears briefly on the display and you
return to the Bluetooth menu.
Press X to exit without saving changes.