Avery Dennison Sierra Sport3 9433 Bluetooth - Manual (Page 5)

5
Changing the PIN
This option allows you to set the Bluetooth PIN. The PIN can be up to 15
characters: 0-9. Even though a space character is displayed while you
scroll through the values, the PIN cannot contain a space.
If security is enabled, you need to set a PIN. If security is disabled, you do
not need to set a PIN.
1.
From the Bluetooth menu, select Change PIN. The previous PIN value
is shown.
PIN
123456
E R +
Use the navigation buttons as shown in the following table:
E R +
Saves the setting Scrolls through the
positions from left to right Scrolls through numbers
0-9
2. When the setting you want is displayed, press the navigation button
under
E to save the setting. “PIN Changed” appears briefly on the
display and you return to the Bluetooth menu.
Note: If you need to clear digits from your PIN, make a space the second
digit, save the setting, and then select Change Pin again.
Only your first digit was saved, because the space is a terminating
character.
Setting the Local Name
This option allows you to view and set the Bluetooth local name. The local
name can be up to 15 characters: uppercase letters A-Z, numbers 0-9, and
the space character. The local name can contain space characters.
The local name is used for identification purposes with the host, not
authentication. You should use a logical name for each printer, such as
warehouse, receiving dock, etc.
1.
From the Bluetooth menu, select Local Name. The default or
last-saved local name appears, for example:
Local Name
WRHSE 1
E R +