Avery Dennison 9840 Addendum - Manual (Page 6)

6
CAUTION
Make sure the shelf is not misaligned with the platen
roller, or damage to the platen roller could occur.
9. Close the exit cover.
10. Load supplies. Refer to your Operator’s Handbook.
11. Close the printhead assembly and the cover.
12. Make sure the printer’s DIP switches are set correctly. See “Printing
Linerless Labels.”
13. Turn on the printer.
14. Verify the alignment of the platen roller with the peel bar or shelf. Press
FEED to position the supply under the printhead.
Shelf not inserted correctly.
Platen roller
Shelf