Avery Dennison 9840 Addendum - Manual (Page 5)

5
7. If inserting the peel bar:
Insert the left edge of the peel bar into the side slot at an angle.
Then, slide the peel bar to the right and press down until you hear it
click into place. The peel bar must be lined up with the platen roller.
8. If inserting the shelf:
Insert the left edge of the shelf into the side slot at an angle. Slide
the shelf to the right, aligning it with the spring latch, and press down
until you hear it click into place. The shelf must be lined up with the
platen roller.
The shelf must be parallel to the platen roller, not at an angle. See
the following diagrams.
Shelf inserted correctly.
Side slot
Peel bar
Platen roller
Shelf
Platen roller
Spring latch