Avery Dennison 9835 Addendum - Manual (Page 8)

8
If you answered “Yes” to the cut option prompt, you need to select a cut
mode. There are several cut mode options:
Cut after tag
(Cut Mode 1)
Cuts before first tag, cuts each tag, and cuts after last tag.
Cut after batch
(Cut Mode 2)
Cuts before first tag, cuts after batch. Cuts in strips, not
each tag.
Cut last ticket
(Cut Mode 3)
Cuts before first tag, cuts each tag, cuts after the last tag
and feeds one or two tags past the printhead when it cuts the
last tag in the last batch.
No cut before
(Cut Mode 4)
Does not cut before the first tag in a batch, but cuts between
each tag and after the last tag in the batch.
You will see
Cut multiple
[1/32000]: 1
♦ Type the number of tags to print before cutting and press E, or accept
the default value of 1 by pressing E. A cut multiple of one cuts after
each tag. This is the same as cut mode 1.
You will see
Cut Last Ticket:
No r
♦ If you want to cut the last tag in the batch, press R to display “Yes” and
press E. The printer feeds one or two tags past the printhead when it
cuts the last tag in the last batch. Depending on the length of your
supply, you may lose up to two tags after the last batch. This is the same
as cut mode 3.
You will see
Cut After Batch:
No r
♦ If you want to cut after every batch, press R to display "Yes" and press
E. The knife cuts before the first tag and cuts after batch, so the tags
are cuts in strips. This is the same as cut mode 2.