Avery Dennison 9835 Addendum - Manual (Page 2)

2
Example B,3,12,V,50,50,3,7,40,8,L,0¦
Defines a bar code field (field #3) with 12 characters of variable length
starting at row 50, column 50. An I2 of 5 bar code with a density of 7 (wide
to narrow ratio is 2.3:1 and the narrow bar size is 3/14.8) and a height of 40.
Only the bar code is printed (no numbering scheme on the bottom) and the
bar code is left aligned without any field rotation.
U s i n g t h e N e w S u p p l y / F e e d L e n g t h a n d S u p p l y W i d t h
For the 9835 printer, the minimum supply length is 0.5 inches (12.7 mm),
instead of 0.75 inches (19 mm). For the 9840 printer, the minimum supply
length is 0.32 inches (8 mm) and the minimum supply width is 0.75 inches
(19 mm) instead of 1.2 inches (30.5 mm).
When printing labels shorter than 0.75 inches on the 9840
printer, we recommend using a maximum print speed of
4.0 inches per second (ips).
Make sure the values in the format header match the length and width of your
supply. Measure supply from left to right and top to bottom or from the top of
one black mark to the top of the next black mark. Refer to the optional
Packet Reference Manual available from our Web site or in a printed version
by ordering part number TC9800PM.
U s i n g E x t e n d e d B a c k f e e d
To use extended backfeed, you must define the Backfeed Control Packet or
use the optional keypad. Use extended backfeed on 9835 or 9840 printers
with a knife installed. Extended backfeed feeds a tag far enough out to be
cut and backfeeds the next tag to the printhead line. Extended backfeed
works with the selected cut modes.
D e n s i t y
B a r C o d e T y p e