Avery Dennison Renegade 4 9490 Wall Chart - Manual (Page 2)

LOADING RIBBON
1. Open the printer (see decal on the
back of the printer).
2. Remove the old ribbon cassette by
lifting the cassette up and off the
printhead assembly.
3. Slide a new ribbon cassette down onto
the printhead assembly.
CLEANING THE PRINTER
Clean the printhead, platen roller, peel bar,
pinch rollers and peel blade:
✦ after every eight rolls of supply
✦ after clearing a jam
✦ daily if used in a dirty area
✦ when you see voids in the print as
shown.
1. Turn the printer off and open the printer
(see decal on the back of the printer).
2. Remove the label roll and ribbon cassette (to show the printhead).
c
Do Not touch the printhead with your hands. This may damage the
printhead. Do Not use sharp objects to clean the printhead. This may
damage the printer and require a service charge.
3. Moisten a cotton swab with alcohol. Rub it back and forth across the printhead,
platen roller, and peel blade to remove build up.
4. Let the printer dry, reload supplies and close the printer.
Printhead
Platen
Roller Peel
Blade Pinch
Rollers
Ribbon
Cassette
Printhead
Assembly
Voids Correct Print