Avery Dennison 9401 - Manual (Page 15)

Message Description/Action
Host Error:
Not Ready You are trying to communicate
with a host computer, but the
host is not ready.
Make sure
•
the computer is On
•
you have connected the
communications cables
correctly
•
communications are active.
Then re-transmit the data.
Host Error:
Overrun This error may be due to an
incorrect flow control settings on
the printer or host, incorrect
cabling, or lack of host response.
Make sure the printer and host
flow control settings match (both
are DTR or both are Xon/Xoff).
If the message persists, call
Monarch Service.
Host Error:
Parity The parity on the printer does
not match the parity on the host
computer.
Set the printer parity to match
the host computer.
Invalid Command!
Press ENTER. You tried to delete a standard or
customized format.
You cannot delete standard and
customized formats.
O
p
erat
io
n
M
essag
es
3. Operation Messages
3-9