Avery Dennison ALX 924 Operating Manual - Manual (Page 15)

09/06 Rev. 3.06-01 OPERATING MANUAL Device Description
ALX 92x
15
Plug-in card
You require the following to load a print job from a CF card:
•
CF card (copy the print job to the directory \FORMATS)
•
CF card reader (to connect to your computer)
Transferring print jobs via CF card : A detailed description can be found in
topic section „Advanced Applications“, chapter “Standalone Mode”.
Applying CompactFlash cards
CF = CompactFlash
¯
The device firmware cannot utilise more than 128 MB of card storage
capacity.
[7] Example: A 32 MB CF card (T1).
Suitable CF cards : see Plugin-card manual, topic section „Card types“,
chapter „CompactFlash card“.
Applying CF cards : see Plugin-card manual, topic section „Application“,
chapter „CompactFlash card“.
[8] Inserting the CF card (A) causes the release button (B) to come out. If the card has been
inserted correctly, it will sit flush with the printer’s back wall (right)
CAUTION! - Observe the following guidelines to avoid damaging the device
or the CF card.
« Only use CF -cards approved by the manufacturer.
« Always wait at least 5 seconds after switching off the device before
removing or inserting the CF card.
« When inserting or removing the CF card, never use force.
Wide guide notch Slim guide notch
Contacts
A
B
B