Avery Dennison ALS 380 - Manual (Page 42)

40
4 O
PERATION
4.1 A
CTIVATION AND SHUT
-
DOWN
ALS
380
Switching off
Switch over the active machine
On the operator panel of the active machine:
➔ Press the FEED [37] key.
– The indication on the operator panel changes from
ON to BUSY, until the machine stops.
– The machine switches over to standby. The opera-
tor panel indicates LOCK.
– The other machine is activated.
Stopping operation
On the operator panel of the active machine:
➔ Press the ENTER key.
– The machine stops, the operator panel indicates
OFF.
– The other machine is activated.
On the operator panel of the now active machine:
– The indication on the operator panel changes from
LOCK to ON.
➔ Press the ENTER key.
– The machine stops, the operator panel indicates
OFF.
To resume operation:
➔ On the machine that is to begin labelling first: press
the ENTER key.
– The operator panel of this machine indicates ON.
➔ On the other machine: press the ENTER key.
– The operator panel of this machine indicates LOCK.
– As soon as the product sensor sends a start signal,
the labelling operaton is activated.
If the currently active machine is switched off at
the main switch, while the second machine is in
standby:
– The second machine is automatically activat-
ed.
➔ Do not interrupt tandem operation using the
main switches.
➔ Only actuate the main switch if the operator
panels of the two machines indicate OFF.
[37] FEED key