Avery Dennison Monarch 9864 Quick Reference - Manual (Page 3)

06/08 Rev. AA QUICK REFERENCE Getting Started
9864
1
Using the Printer
This Quick Reference contains supply loading and general care and
maintenance procedures. For more detailed information, refer to the
Operator’s Handbook on the CD-Rom included with your printer.
« Review the safety information in the Regulatory Compliance document on the
CD-Rom before you begin.
Connecting the printer
1. Turn the printer power switch to “0” (off).
2. Connect the printer to the power supply using the cable provided.
3. Using the data cable supplied, connect the Centronics interface on the
printer to the host computer.
[1] Sockets for the Centronics cable (A) and power cable (B) on a 9864.
4. Turn on the printer using the power switch (set to position “1”). You see the
following sequence of messages:
WARNING!
Touching live electrical parts causes exposure to hazardous electrical
currents and may lead to burns.
« Turn off the printer before connecting the power cable.
« Only operate the printer using the system voltage indicated on the
nameplate.
« Only connect the printer to a grounded power socket fitted to authorized
standards.
« Connect the power cable so that
– no one trips or steps on it
– the power plug can be easily removed if necessary.
System start... The boot loader is starting.
System start...
Start user prog Valid firmware recognized, program starts.
A
B