Avery Dennison Monarch 9864 Quick Reference - Manual (Page 14)

06/08 Rev. AA QUICK REFERENCE
9864
12
Material parameters
The following three parameters are used to set the material properties:
P
For more information on setting parameters, see “Operating the
parameter menu” in the topic section “Info printouts and parameters.”
Parameter Function
PRINT PARAMETER > material type Sets the material type (punched or
continuous)
PRINT PARAMETER > material length Sets the material length
PRINT PARAMETER > material width Sets the material width
SYSTEM PARAMETER > light sens. type Sets the sensor type (reflex or
transmission) based on the material
(marks or perforations)
[Tab. 1] Important parameters for setting material properties