Avery Dennison FreshMarx 9417 Quick Reference - Manual (Page 9)

3. Use the plastic knife to press the L-shaped bar. The platen
roller is released.
Note: Art is cut-away to show detail.
4. Clean the platen roller and printhead using a cotton swab
moistened with isopropyl alcohol.
5. Allow time for the parts to dry.
6. Replace the platen roller.
7. Snap the cover into place.
8. Reload the labels.
Cleaning the Display and Case
 Make sure the printer is turned off when cleaning the display.
Use a soft, lint-free cloth to wipe the display.
Caution: Do not use sharp objects or abrasive cleaners on the
display; they can cause damage.
 Slightly dampen a cloth with water and wipe off the printer’s
case.
 Open the cover and use a dry, soft-bristled brush to remove
paper dust.
Caution: Do not use household cleaners to clean the printer.
EN-9