Avalon Firestyles Vashon-1998 to 1999 - Manual (Page 33)

Optional Equipment
33
Travis Industries 9 3 5 0 8 1 0 2 0 9 1 0 0 2
5 Use the included strain relief to attach the power cord to the left side mounting bracket.
a
b
Insert the molex
connector through the
left side fan mounting
bracket.
Use pliers to compress the strain
relief from the top and bottom while
pushing it into the hole in the
bracket.
6 Install the blower assembly following the directions below.
c
Slide the blower into
place. The notches on
the mounting brackets
hang on screws in the
pedestal. Secure with
the four screws.
a b
Use lock ties to secure any excess wire
away from the burner pan and blower.
d
5/16" Nutdriver
Attach the power
cord to the wiring
harness.
5/16" Nutdriver
Attach the wiring harness to the blower
(orientation does not matter).
7 Attach the fan guard with the six screws following the directions below.
Attach the fan
guard with the six
smaller (#8)
screws. You may
wish to pre-thread
the holes in the fan
guard and base of
the stove to ease
installation.
1/4" Nutdriver
8 Replace the control panel removed in step 1.