Avalon Firestyles D-V-1995 - Manual (Page 26)

P AGE 26
O
PERATING
Y
OUR
H
EATER
(C
ONTINUED
)
Starting the Stove for the First Time
+ Fumes and smoke from the paint curing and oil burning off the steel may occur the first time you
start your stove. This is normal. We recommend you open windows to vent the room.
+ Condensation may appear on the glass each time you start the stove - this is normal.
+ Blue Flames will occur on the stove when it first comes on. After fifteen minutes the flames will
turn a more realistic yellow and orange color.
? Certain installations use a remote "wall switch" to turn the stove on and off. If this is the case, leave
the ON/OFF switch "ON".
Turning the Stove On and Off
OF
F
ON
Use this switch to
turn the main burner
on and off manually.
After the pilot has been started...
For systems with remotes,
make sure the On/Off Switch
shown to the left is on. Then
use this button here to turn the
main burner on and off. For systems with thermostats,
use this switch to control the
temperature (right is hotter, left
cooler). Some systems
require the on/off switch to be
on.
See the optional
equipment instructions
for installing the battery.
! Do not place any combustible items on top of or directly in front of the stove, even temporarily. The
optional thermostat may start the stove causing a combustible item to ignite.
? If the stove turns on and off frequently while using the thermostat, you may want to adjust the flame
height down until it produces just enough heat needed.
Adjusting the Flame Height
+ Your stove has an adjustable flame to tailor the look and heat output to your specific needs. It is
adjusted by turning the middle dial on the gas control valve.
Flame Height
Adjustment Knob
Index Mark
Turn clockwise to adjust the flame higher, counter-clockwise to lower.
PILOT ADJ
VENT
T
O L PI
ON
OFF HI
LO
VENT
HI
LO