Auto-Zone Control Systems USB-Link 2 Technical Guide, Installation Instructions for the USB-Link 2 (Version 01E) - Manual (Page 2)

Table of Contents
WattMaster Controls, Inc.
8500 NW River Park Drive · Parkville, MO 64152
Toll Free Phone: 866-918-1100
PH: (816) 505-1100 · FAX: (816) 505-1101 · E-mail: [email protected]
Visit our website at www.wattmaster.com
Form: WM-USBLII-TGD-01E © October 2014 WattMaster Controls, Inc.
Windows
® XP , Vista, Windows ® 7 & 8 are registered trademarks of Microsoft
Corporation.
WattMaster Controls, Inc. assumes no responsibility for errors or omissions.
This document is subject to change without notice.
General Information ......................................................................................................................................... 3
USB-Link 2 Overview ...................................................................................................................................................................3
System Requirements ..................................................................................................................................................................3
Quick Guide ...................................................................................................................................................... 4
USB-Link 2 Driver Installation Instructions .................................................................................................... 5
Connection and Wiring .................................................................................................................................... 6
Finding the COM Port Number ......................................................................................................................... 7
Prism 2 Setup Instructions .............................................................................................................................. 8
Communication Settings and LED Descriptions ........................................................................................... 10
USB-Link 2 Switch Settings........................................................................................................................................................10
USB-Link 2 LED Descriptions ....................................................................................................................................................10
Troubleshooting ............................................................................................................................................. 11
Troubleshooting Tips .................................................................................................................................................................. 11
Changing the USB COM Port Number .......................................................................................................................................12
Verifying CommLink II, CommLink III, and MiniLink EPROM Software Versions .......................................................................13