Artesyn NITX-300-ET-DVI Installation and Use (August 2014) - Manual (Page 71)

BIOS
NITX-300-ET-DVI Installation and Use (6806800N97B) 71
vBIOS Version 2032
IEGD Driver Version N/A
MSAC Mode Select Select the size of the graphics memory aperture and untrusted
space. Used by the Integrated Graphics Device. Item: Enabled,
512MB; Enabled, 256MB; Enabled, 128MB. Default is "Enabled,
256MB".
IGD - Boot Type Select the Video Device which will be activated during POST. This has
no effect if external graphics present. Items: VBIOS Default, CRT,
LVDS, CRT+LVDS. Default is VBIOS Default
Boot Display Configuration Boot Display Configuration, see Table 5-17 on page 71
This item only shows with LVDS version BIOS, by default, this item is
not shown.
Table 5-17 Boot Display Configuration
Field Description
Boot Display Configuration
Display Device Support display device list: DVI CH7307, 800x600 AUO G104SN03,
1024x768 CHI MEI G121X1-L04. The default is the DVI CH7307.
VBIOS supports VESA mode, it could not handle mode 0x123 for display to a non-standard
mode such as 1650x1050.
Table 5-18 IOH Configuration
Field Description
Wake On Lan Configuration Wake On Lan Configuration settings, see later description
Table 5-16 North Bridge Chipset Configuration (continued)
Field Description