Artesyn NITX-300-ET-DVI Installation and Use (August 2014) - Manual (Page 66)

BIOS
NITX-300-ET-DVI Installation and Use (6806800N97B) 66
Execute Disable Bit XD can prevent certain classes of malicious buffer overflow attacks
when combined with a supporting OS (Windows Server 2003 SP1,
Windows XP SP2, SuSE Linux 9.2, RedHat Enterprise 3 Update 3.)
Default is "Enabled".
Intel Virtualization When enabled, a VM can utilize the additional hardware
capabilities provided by Vanderpool Technology. Default is
"Disabled".
C-States Enable/Disable C2 and above. Default is "Enabled".
Enhanced C3 Enable or Disable Enhanced C3 State. Default is "Disabled".
Table 5-8 Watchdog Timer Configuration
Field Description
Watchdog Timer Select an optimal settings Watchdog Timer (WDT). Items:
Disabled, Enabled. Default value is "Disabled".
WDT Reset Type Select the wanted reset type when the watchdog timer is
triggered. Items: Cold Reset, Warm Reset. Default is "Warm Reset".
Time-Out (Minutes) Set timer to wait before system reset. The value range is from 1 to
10 minutes, the step is 1 minute. Default value is "5 minutes".
Table 5-9 SDIO Configuration
Field Description
SDIO Access Mode Auto Option: Access SD device in DMA mode if controller supports
it, otherwise in PIO mode. DMA Option: Access SD device in DMA
mode. PIO Option: Access SD device in PIO mode.
Default is Auto.
Table 5-10 USB Configuration
Field Description
USB Devices: List the attached USB Devices
USB Support USB Support Parameters.
Table 5-7 CPU Configuration (continued)
Field Description