Artesyn NITX-300-ET-DVI Installation and Use (August 2014) - Manual (Page 52)

Functional Description
NITX-300-ET-DVI Installation and Use (6806800N97B) 52
 Priority control by each message object
 Programmable FIFO mode (concatenation of message objects)
 Maskable interrupt (bus-off/error warning/reception completion/transmission
completion)
 Detection/identification of bit error/stuff error/CRC error/form error/acknowledge error
 Programmable loop-back mode for self-test operation
 Disabled Automatic Retransmission (DAR) mode for time triggered CAN applications
For more information, see Table 3-9 on page 38 .
4.12 I2C Serial Interface and Devices
There is one I2C compatible SMbus on the TNC. The following devices connect to the SMbus:
 Trusted Platform Module (TPM)
 One 1x PCI-E slot
 One Mini PCI-E slot
 Temperature sensor EMC2103