Artesyn NITX-300-ET-DVI Installation and Use (August 2014) - Manual (Page 23)

Hardware Preparation and Installation
NITX-300-ET-DVI Installation and Use (6806800N97B) 23
2.1.3 Power Requirements
The following table describes the power dissipation of the NITX-300-ET-DVI board.
2.2 Unpacking and Inspecting the Board
Read all notices and cautions prior to unpacking the product.
Table 2-3 NITX-300-ET-DVI Power Dissipation
State +12 V VCC_RTC Power consumption (w)
G3 (AC off) 0 26.8μA
Idle (CMOS Setup) 0.8A 0 9.6w
Idle (Window XP SP3 X32) 0.78~0.87A 0 9.36w~10.44w
FullLoading (PTU+Burn In
Test) 0.9~0.96A 0 10.8w~11.52w
s5 0.038A (unplug ethernet)
0.155 A (plug ethernet) 0 0.456w (unplug
ethernet) 1.86w (plug
ethernet)
Damage of Circuits
Electrostatic discharge and incorrect installation and removal can damage circuits or
shorten their life.
Before touching the board or electronic components, make sure that you are working in an
ESD-safe environment.