Artesyn NITX-300-ET-DVI Installation and Use (August 2014) - Manual (Page 15)

Chapter 1
NITX-300-ET-DVI Installation and Use (6806800N97B) 15
Introduction
1.1 Overview
NITX-300-ET-DVI is a highly integrated small form factor Nano-ITX board based on the
Queensbay platform, including the Tunnel Creek processor and Topcliff IOH. The NITX-300-ET-
DVI incorporates the standard processor, memory, graphics and I/O functionality, as is
common to a small form factor PC motherboard. The NITX-300-ET-DVI operates with or
without a local display. Standard PC expansion ports are also available on the rear panel along
with additional USB ports, SATA and Low Voltage Differential Signaling (LVDS) via headers on
the board as well as a single PCI Express expansion slot. As the NITX-300-ET-DVI is based on the
latest Intel Queensbay platform, it has a long product life cycle, lower power consumption and
suitable for fanless applications. NITX-300-ET-DVI performs well within extended temperature
ranges for more rugged commercial applications. NITX-300-ET-DVI is designed to meet -40 °C
to -85 °C ambient temperature requirement.
Table 1-1 Key Features of the NITX-300-ET-DVI
Function Features
Processor  Intel Tunnel Creek processor E620T 0.6GHz
 Single channel memory controller supporting DDR2 800 MT/s
memory down
 Both LVDS up to 1280x768 @ 60Hz and Serialized Digital Video
Output (SDVO) output up to 1280x1024 @ 85Hz output support
 Four x1 lane PCI Express (PCI-E) root ports supporting the PCI
Express Base Specification, Revision 1.0a
 Implements an Low Pin-Count (LPC) interface as described in the
LPC1.1 specification
 SMBus host controller based on Version 1.0 support
 Serial Peripheral Interface (SPI)
 Integrated Watch Dog Timer (WDT)
IO Hub (IOH)  Intel Topcliff IOH
BIOS Device  One 4MB SPI boot device
Memory  Supports 512MB 32-bit DDR2 800 MHz non-ECC memory down on
NITX-300-ET-DVI
eUSB flash  An optional eUSB flash on one 2x5 header on board
PCI-E  One PCI-E x1 slot
 One mini PCI-E socket