Artesyn iVPX7225 RTM Installation and Use (April 2015) - Manual (Page 51)

Functional Description
iVPX7225 RTM Installation and Use (6806800S35B) 51
4.7 IPMC Debug Port
Access to the iVPX7225 IPMC Controller Serial Debug interface is provided via J1201 on the
RTM planar. Although, physically, the IPMC Debug connector is a Mini-B USB Receptacle, this is
“not” a USB port. Refer to the connector pinout sections in
Chapter 3, Controls, LEDs and
Connectors for the signal assignments. An adapter cable is necessary to make the appropriate
electrical connections between the RTM Mini-B USB physical connector and the physical
connector to the serial port in the end application (not provided).
4.8 GPIO
iVPX7225 RTM header P702 provides access to eight user-defined GPIO pins routed to the
iVPX7225 PCH via VPX user IO pins.
4.9 XMC Rear IO Access
iVPX7225 RTM connector J1101 is a Samtec Edge Rate Socket providing access to the 12
differential pairs defined by the VITA 46.9 3U X12d Pattern.