Artesyn iVPX7225 RTM Installation and Use (April 2015) - Manual (Page 17)

Safety Notes
iVPX7225 RTM Installation and Use (6806800S35B) 17
Product Damage
High humidity and condensation on surfaces cause short circuits.
Do not operate the product outside the specified environmental limits. Make sure the product
is completely dry and there is no moisture on any surface before applying power.
Expansion and FRU Replacement
Product Damage
Bent pins or loose components can cause damage to the product, the backplane, or other
system components.
Carefully inspect the product and the backplane for both pin and component integrity before
installation.
Personal Injury
During operation, hot surfaces may be present on the heat sinks and components of the
product.
To prevent injury from hot surfaces do not touch any of the exposed components or heat sinks
on the product when handling. Use the handle and face plate when removing the product
from the enclosure.
Hot Swap
Product Damage
Installing or removing the product while power is applied damages the product.
Power off the rack before installing or removing the product.