Artesyn iVPX7225 RTM Installation and Use (April 2015) - Manual (Page 28)

Hardware Preparation and Installation
iVPX7225 RTM Installation and Use (6806800S35B) 28
2. Check for damage. If damaged, report immediately to customer service.
3. Remove the desiccant bag shipped together with the board and dispose properly.
2.3 Environmental and Power Requirements
The following environmental and power requirements are applicable to the board.
2.3.1 Environmental Requirements
The environmental conditions must be tested and proven in the used system configuration.
These conditions refer to the surroundings of the board within the user environment.
The board is thoroughly inspected before shipment. If damage occurred during transporta-
tion or any items are missing, please contact customer service immediately.
 Operating temperatures refer to the temperature of the air circulating around the board
and not to the component temperature.
 To ensure that the operating conditions are met, forced air cooling is required within the
shelf environment.
 The environmental values given in the table below only apply to the board without any
accessories. If installing accessories, their environmental requirements must also be
taken into account.
Product Damage
 High humidity and condensation on the board surface causes short circuits.
 Do not operate the board outside the specified environmental limits. Make sure the
board is completely dry and there is no moisture on any surface before applying power.