Artesyn iVPX7225 RTM Installation and Use (April 2015) - Manual (Page 29)

Hardware Preparation and Installation
iVPX7225 RTM Installation and Use (6806800S35B) 29
2.3.2 Power Requirements
The following table contains the Power requirements:
Table 2-1 Environmental Requirements
Environmental Parameter Air Cooled
Cooling Method Forced Air
Operating Temperature -40 °C to +71 °C
Storage Temperature -50 °C to +100 °C
Vibration Sine (10 min/Axis) 5G, 15 to 2000 HZ
Vibration Random (1 Hr/Axis) 0.04g2/Hz, 15 to 2000 Hz (8GRMS) 1
Shock 30g/11ms
Humidity to 95% RH non-condensing
1. Flat 15-1000Hz, -6db/octave 1000Hz – 2000Hz [MIL-STD 810F Figure 514.5C-17]
Table 2-2 Power Requirements
Voltage Rail Minimum Power Typical Power Maximum Power
5V (VS3) 4.5W 6.2W 7.7W
3.3V 1.7W 2.7W 3.3W
Minimum Power: Representative of running Linux in a pure text mode (No X11/No GNOME), resting idle
the Linux login prompt. All externally powered peripherals idle.
Typical Power: Representative of running all front panel and planar I/O: 3-SATA (1@3Gb/s; 2@6Gb/s), 2-
Gigabit Ethernet, 2-USB 2.0, DP, VGA, Keyboard and COM. All externally powered peripherals active.
Maximum Power: Calculated worst-case power based upon device data sheets and is not expected to
be reached under normal operation. All peripherals are presumed to be externally powered.