Artesyn Centellis 2000 User Card-10GE Installation and Use (May 2014) - Manual (Page 30)

Centellis 2000 User Card-10GE Hardware
Centellis 2000 User Card-10GE Installation and Use (6806800H33C) 30
3. Grasp the SFP/SFP+ module and carefully slide it out of the slot.
4. Cover the optical port with the optical port plug.
2.6 Frame Ground and ESD
Frame ground connection is provided by the backplane connector FrameGND.
The face plate mounting holes of the board are connected to frame ground.
An ESD strip according to the AdvancedTCA specification PICMG 3.0 R3.0 is provided at one
edge of the PCB.
SFP/SFP+ Module Damage
The optical port plug protects the sensitive optical fibres against dirt and damage. Dirt and
damage can render the SFP/SFP+ module inoperable.
Only remove the optical plug when you are ready to connect a cable to the SFP/SFP+ module.
When no cable is connected, cover the port with an optical port plug.