Diagnostics, Mech, Cartridges – Dell CDPR3 User Manual
Page 51: Tray sensors, Update autoloader flash

24. Select the Disc button to close the printer tray.
25. Close the Printing Preference window.
Diagnostics
At the
Advanced
tab under
Maintenance
, the
Diagnostics
dialog provides several
device tests.
Mech
Select
Power Off
and
Power On
to cycle power to the tray mechanism. Select the
Power ON
button to resume operation.
Cartridges
Select the
Validate
button to verify if the ink cartridges are authentic ink cartridges.
Select the
Test
button to test communications between the printer and the cartridges.
Tray Sensors
The Tray Sensors function is for use only by, or at the direction of, Rimage Service
personnel. Contact Rimage Corporation for additional information.
Update Autoloader Flash
To update the autoloader’s flash firmware, download the latest flash from the Rimage
Website.
Save the flash file to the root of your local hard drive.
1. Open Production Server.
2. Stop the automation by making sure the Start button is not depressed as
shown in here.
51
User Guide Reference