Dell CDPR3 User Manual

Page 28

6. Press the Disc button and the printer tray comes out. If the tray does not come

out, go to page

for help.

7. Manually rotate the leadscrew counterclockwise to lower the picker down to the

printer tray. The leadscrew can only be rotated if the picker motor is not

energized. Do not press the operator button on the autoloader! If the leadscrew

cannot be rotated, refer to “

” section on page 31.

If the printer tray was moved during the alignment, you must run the tray in and

out again.

8. If the picker fingers are not centered over the hole of the disc, alignment is

necessary.

Installation 28