Using the configuration menu – D-Link DI-707P User Manual

Page 28

Using the Configuration Menu

Advanced > Routing

Static routes can be added if you require specific routes within your internal network.
These routes will not apply to the WAN (Internet) network.

Destination-

Enter in the IP of the specified network that you want to
access using the static route

Subnet Mask-

Enter in the subnet mask to be used for the specified net
work.

Gateway-

Enter in the gateway IP address to the specified network.

Hop-

Enter in the amount of hops it will take to the specified
network.

Enable-

Select this option for the specified static route to take effect.

Hop Count - in a transmission path, each link is terminated at a network device

such as a router or gateway. The number of hops equals the number of routers or
gateways that data must pass through before reaching the destination.