Using the configuration menu – D-Link DI-707P User Manual

Page 25

Text mode
Original mode

Using the Configuration Menu

Advanced > SNMP

Enable SNMP-

Get Community-

(Simple Network Management Protocol)

Enter the password public in this field to allow “Read only”

access to network administration using SNMP. You can view

the network, but no configuration is possible wth this setting.

Set Community-

Enter the password private in this field to gain “Read and

Write” access to the network using SNMP software. The ad-

ministrator can configure the network with this setting.

Local-

Remote-

SNMP (Simple Network Management Protocol) is a widely used network monitoring and
control protocol that reports activity on each network device to the administrator of the
network. SNMP can be used to monitor traffic and statistics of the DI-707P. The DI-707P
supports SNMP v1.

WAN (Wide Area Network)

LAN (Local Area Network)