beautypg.com

Using the configuration menu – D-Link DI-707P User Manual

Page 23

background image

22

Using the Configuration Menu

Advanced >
IP Filter

Disabled IP Filter-

Select this option if

you do not want to use

IP filters.

Allow all computers
to access the Internet
except those listed
below-

Those in the list will be denied access to the Internet; all other computers will be allowed

access to the Internet.

Schedule-

IP-

Enter in the IP address range of the computers that you want the policy to apply to. If it

is only a single computer that you want the policy applied to, then enter the IP address of

that computer in the Start Source IP and leave the End Source IP blank.

Use IP (Internet Proto-

col) filters to allow or

deny computers ac-

cess to the Internet

based on their IP ad-

dress.

Deny all computers access to the Internet except those listed below-

Select this option to deny all computers access to the Internet except those that are

listed below. All other computers will be denied access to the Internet.

Port-

Enter in the port range of the TCP/UDP ports that you want the policy to apply to. If it is

only a single port that you want the policy applied to, then enter the port number in the

Start Port field and leave the End Port field blank. If you want to use all the ports, you

can leave the port range empty.

Enabled or Disabled-

Click Enabled to apply the filter policy or click Disabled to enter an inactive filter policy

(You can reactivate the policy later.)

Select Always, or choose From and enter the time period during which the IP filter policy

will be in effect.