Parental control, Figure 29 – firewall parental control screen – ARRIS SBG6782 AC User Guide User Manual
Page 49
Gateway Configuration Screen Definitions
SBG6782-AC Wireless Cable Modem & Router • User Guide
40
365-095-23865 x.1
Parental Control
You can use the Parental Control screen to set up user access restrictions on a specific device
connected to your SBG6782-AC network. You can set up the following Parental Controls:
•
Allow or block access to specific Internet sites.
•
Allow or block access to specific MAC addresses.
•
Allow or block Internet access based on specific day and time settings.
•
Enable or disable Internet session duration timers to limit the amount of time for Internet
access.
Note
: When creating Parental Control access filters, remember to assign the Start and End
ports. Otherwise, any filters without assigned ports will apply to all ports. This also applies to
MAC addresses.
Figure 29 – Firewall Parental Control Screen
Table 13 – Firewall Parental Control-Field Descriptions
FIELD
DESCRIPTION
Description
Enter a name to create a new user profile.
MAC Address
Enter the 12-digit (hexadecimal) hardware address of the device that
you are setting up for parental controls.
The MAC addressed is assigned by the hardware manufacturer and
should be located on the device label.