ARRIS WECB460 - Manual (Page 6)

LAN2 (Green)
On - System with Ethernet port connected.
Off - No system connected.Blinking (Green) –
Indicates traffic with device connected via Ethernet
cable to Ethernet port 2.
MoCA On (Green) – MoCA network enabled.
Off – MoCA network disabled.
Slow Blinking (Green) – Indicates traffic with
connected client device(s) via MoCA.
2.4GHz (Green) On (Green) – 2.4 GHz wireless network is enabled
and active.
Off – 2.4 GHz wireless network is disabled.
Fast Blinking (Green) – Indicates traffic with
connected client device.
5GHz (Green) On (Green) – 5 GHz wireless network is enabled
and active.
Off – 5 GHz wireless network is disabled.
Fast Blinking (Green) – Indicates traffic with
connected client device.
WPS LED (Green) Off – Not in use.
Slow Blinking (Green) - When the WPS button is
pressed, the LED will slow blink for up to 2 minutes
or until connection to the client device is established.
The LED will turn off immediately upon client pairing.
WPS Button Press the WPS button on the WECB460 Wi-Fi
MoCA Bridge and on your client wireless device to
perform WPS setup that easily creates an
encryption-secured wireless connection
automatically.
Client Connection: When pressed and held for
over 1 second, then released, the WECB460 Wi-Fi
MoCA Bridge will perform WPS setup with client
devices. The WPS LED will blink for up to 2
minutes, so the WPS connection process should be
completed within 2 minutes.
4