ARRIS WECB460 User Manual

Page 12

Text mode
Original mode

Step 5b: Set the MoCA Direction to Client

Access the configuration interface and select the MoCA tab, Interface
screen. Set the Direction field to Client. This ensures that the MoCA
interface points to the home network.

Click the Apply button to save and apply the changes.

Step 6: Create a new MoCA Network in the Home (Optional)

The WECB460 Wi-Fi MoCA Bridge that is connected to the Router or
Cable Modem via Ethernet can use the available RF connector to establish
a new MoCA network. This requires the user to:

• connect a coaxial cable between the WECB460 Wi-Fi MoCA Bridge

and the nearest available coaxial cable wall outlet, and

• to ensure a POE filter is installed at the entry of the RF network to the

home and on any connected non-MoCA devices subject to interference
from MoCA signals, and

• to place one or more MoCA clients on the home RF network for MoCA

communications