Analog Way V-Scale C - VSL300 - Manual (Page 17)

VSL range Chapter 2 : STARTING (continued)
PAGE 17
2-3. STARTING THE V-SCALE PLUS
• Connections:
c Turn OFF all of your equipment before connecting.
d Connect your video sources to the inputs 1, 2, 3 & 4 of the V-SCALE PLUS.
e Connect your computer source to the input 5 of the V-SCALE PLUS.
f Connect your display device (projector, plasma screen...) to the DISPLAY OUTPUTS (HD15 or DVI-I female
connectors) of the V-SCALE PLUS.
g Connect the AC power supply cord to the V-SCALE PLUS and to an AC power outlet.
h Turn ON the V-SCALE PLUS (rear panel switch). Then turn ON all your input sources and then your display
device.
• V-SCALE PLUS connection diagram:
IP/L
A N
3 2
4
6
5
• DVI-I pin assignment:
The DVI-I female connector of the V-SCALE PLUS can be used with digital signals as well as analog signals. The table
hereafter explain the pin assignment of these connectors.
Pin
Function
Pin
Function
Pin
Function
1 TMDS Data 2- 9 TMDS Data 1- 17 TMDS Data 0-
2 TMDS Data 2+ 10 TMDS Data 1+ 18 TMDS Data 0+
3 TMDS Data 2 Shield 11 TMDS Data 1 Shield 19 TMDS Data 0 Shield
4
Not used.
12
Not used.
20
Not used.
5 Not used. 13 Not used. 21 Not used.
6 DDC Clock 14 + 5V (Power) 22 TMDS Clock Shield
7
DDC Data
15
Ground for (+5V)
23
TMDS Clock+
8 Analog Vertical Sync. 16 Hot plug detect. 24 TMDS Clock-
C1 Analog Red video
C2
Analog Green Video
C3 Analog Bleu Video
C4 Analog Horizontal Sync
C5 Analog Common Ground Return
DDC = Display Data Channel.
TMDS = Transition Minimized Differential Signal.
8 1
9 16
24 17
C1 C2
C3 C4
C5